Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multi-Plate Eccentric Cone

Status
Not open for further replies.
PhilScrimp

PhilScrimp

Mechanical
Joined
Aug 2, 2017
Messages
7
Location
US
Anyone have experience with a multi-plate eccentric cone in Solidworks? This is a 16'(large opening)x 28"(small opening) x 13'10" tall. I will need multiple plates to fabricate this cone, so I was trying to determine if I could break the cone into its individual plates with break lines.

Picture attached

Thanks,

 
 http://files.engineering.com/getfile.aspx?folder=12147b88-8862-4eb9-b368-51f7fb170c55&file=eccentric_cone.jpg
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
How to (simultaneously) move multiple non linked views in SolidWorks.....
Replies
2
Views
508
CAD2015
CAD2015
R
RFI Belt feature on eccentric pulleys
Replies
2
Views
2K
Rudnie
R
GhassanK
  • Locked
  • Question Question
SolidWorks Copy And Pasting Multiple Entities While Maintaining Relationships
Replies
2
Views
825
ctopher
ctopher
M
How to create locating slots on curved cone surface?
Replies
1
Views
2K
Cadasio
C
LeRepeteur
  • Locked
  • Question Question
BOM Export with Multiple Configurations /Common Parts
Replies
9
Views
1K
Jboggs
Jboggs

Part and Inventory Search

Sponsor

Back
Top