Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MS Spec listed in title block

Status
Not open for further replies.

SaberRaide

Aerospace
Joined
Oct 14, 2008
Messages
17
Location
US
I was researching a fastener from Hi-Shear,HL13, when I noticed the title block references an MS specification, MS24694. Does anyone have a clue as to why the title block would contain a reference to another seemingly unrrelated MS spec?

I looked up MS24694, which is for a steel/CRES/Al 100 deg CSK screw. While the HL13 is for a 100 deg CSK Ti Hi-lok.
 
Head/drive dimensions or similar?

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top