Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
MS 573 1
- Thread starter rivtim
- Start date
-
1
- #2
MS-573 has the following title: CARBON STEEL - AISI 1010, 1212, 1213M, 1215 OR 12L14. It then states "SEE MS-BAR". MS-BAR has the following description for MS-573:
Cold Formed parts shall be fabricated from MS-420 Steel (SAE 1010). Parts machined from bar stock may use these optional materials MS-200 (SAE 1212) and MS-420 (SAE 1010), MS-760 (SAE 1213 or 1215) and MS-3395 (SAE 12L14).
Cold Formed parts shall be fabricated from MS-420 Steel (SAE 1010). Parts machined from bar stock may use these optional materials MS-200 (SAE 1212) and MS-420 (SAE 1010), MS-760 (SAE 1213 or 1215) and MS-3395 (SAE 12L14).
- Status