A while back Ctopher posted a usefull & well received link.
thread1103-197339
In the same spirit I've found some useful information that got me thinking in a couple of places on
Now the bad thing is I think you have to have a membership to view it. However, they have a monthly article from a place called 'Pro CNC' that looks pretty good. is the latest article on there.
Now the good thing, I think the same information is on Pro CNC's own site:
I'm not saying I 100% agree with everything they say, especially coming from the design rather than manufacturing point of view. However, there is some pretty good stuff and a few points got me thinking.
As with anything 'free' on the web - use at your own risk and take a few points with a pinch of salt.
However, I hope it's useful to at least a few of you.
thread1103-197339
In the same spirit I've found some useful information that got me thinking in a couple of places on
Now the bad thing is I think you have to have a membership to view it. However, they have a monthly article from a place called 'Pro CNC' that looks pretty good. is the latest article on there.
Now the good thing, I think the same information is on Pro CNC's own site:
I'm not saying I 100% agree with everything they say, especially coming from the design rather than manufacturing point of view. However, there is some pretty good stuff and a few points got me thinking.
As with anything 'free' on the web - use at your own risk and take a few points with a pinch of salt.
However, I hope it's useful to at least a few of you.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
