Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monel Safety Wire - where used

Status
Not open for further replies.

johnSchwaner

Aerospace
Joined
Jan 15, 2007
Messages
41
Location
US
Where would one use Monel safety wire?

I'm familiar with stainless steel and inconel but the spec for safety wire - MS20995 also includes safety wire made from monel. Can't find anyone who has ever used it.
 
Not I, but Monel piping is used for certain corrosive materials.

TTFN

FAQ731-376
 
A bit off subject,
I use monel wire in a marine application for safety wiring anchor shackles.
B.E.
 
What I've noticed about stainless steel safety wire is that it fatigue breaks easily. In the typical safety wire tying of bolt heads this is not an issue. Possibly anchor shackles need very good corrosion resistance and fatigue strength?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top