Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

moment of inertia

  • Thread starter Thread starter raedbenz
  • Start date Start date
R

raedbenz

Guest
hi everybody...


from where can i get the mass moment of inertia for a body inside the Pro/mechanica....(not inside the mechanism)..


tthans
 
The only way to get moment of interia calcs is after you run the analysis, then check summary file for the analysis.the summary file (.rpt)should have the mass moment of interia.


K
 
You must log in or register to reply here.

Similar threads

S
Dynamic Analysis of Theo Jansen walking mechanism
Replies
0
Views
37K
Sai Rakesh
S
V
How to properly set up the limits of a simulation?
Replies
0
Views
7K
Villa
V
B
How to create Rigid links using Center of gravity and Moments of Interia in Ansys WB?
Replies
0
Views
4K
Bruce321
B
R
Status of MDO
Replies
0
Views
3K
rework
R
E
...moments and angular constraints not enabled?
Replies
1
Views
3K
anwyl
A

Part and Inventory Search

Sponsor

Back
Top