Modulating Gas Burners

[itsmoked]

Got any suggestions for makers of burner systems that take an input signal and modulate the burner appropriately?

Keith Cress
kcress -

http://www.flaminsystems.com

 

[IRstuff]

Brute-force wise? One could take a stovetop burner control and put a stepper motor on it.

Other than that, there's:

http://www.maxoncorp.com/Directory/product_detail/SMARTLINK-CV-Electronic-Valves/65/

or

http://www.maxoncorp.com/Directory/product_detail/KINEDIZER-LE/433/

I guess that you need to be looking at industrial process controls and the like.

TTFN

FAQ731-376

 

[MintJulep]

Eclipse is the name of another industrial gas burner manufacturer.

 

[macmet]

I've had experience using Industrial Combustion (of CB) and Powerflame.

The service with IC was good although the rep was terrible.

Powerflame we just had a small burner, but any calls into their office were handled well.

Both companies are out of the USA.

 

[itsmoked]

Thanks folks - I'm off to check these out.

Keith Cress
kcress -

http://www.flaminsystems.com

 

[mauricestoker]

Good to hear that about IC, as I was planning on using them.

 

[macmet]

I had such a terrible experience with their local rep that I gave up and called the IC engineering office. The few people I spoke with in the office were really good and helped us out quite a bit. I was very impressed.

At one point they directed us to a rep in a different region and he was good.