Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modeling the process of sintering in ABAQUS

Status
Not open for further replies.
ferro1001

ferro1001

Automotive
Joined
Aug 11, 2004
Messages
32
Location
DE
Hi,

I have to model the process of sintering in a model which has to do with powder metallurgy in a FEM program; I have been told that ABAQUS has a module specially designed for this, is this true?, does anybody know where I can find information about this?

Thanks in advance,

ferro1001
 
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
396
mj345
mj345
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
730
FEA way
FEA way
R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way
F
  • Question Question
Purpose of Reaction Force in ABAQUS
Replies
2
Views
2K
FEA way
FEA way
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top