Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

modeling of two plies of hybrid composites?

Status
Not open for further replies.

Bigtree

Structural
Joined
Jan 30, 2006
Messages
65
Location
US
Hi,only two plies but different fibers, say one ply is carbon fibers and one ply is glass fibers, how can I assign materials property/lamina to this part? (In composties section, required at least two layers)
 
1. create the 2 materials (elastic - lamina, etc etc)
2. create composite shell section(s) as appropriate
3. assign the section(s) to the regions of the model as appropriate
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top