I am trying to model a rear suspension that has an ungrounded toe link. Would it be possible to model the suspension as having a toe link connected to the chassis that would be equivalent to the ungrounded toe link? I will be using this hopefully as a quick fix if it is possible and plan to figure out how to model the suspension as an ungrounded link with the software I am using. Any help would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Modeling an Ungrounded Toe Link
- Thread starter NB02
- Start date
GregLocock
Automotive
Not really, not accurately.
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
- Status
Similar threads
- Locked
- Question