The structure I am working with was built in 1958. The roof plans call off a 26L05 long span joist spanning 52'. The SJI 60 yr manual does not include this designation in its loading tables. Does anyone have information on where I could find this "lost" member? Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Missing SJI Joist Designation
- Thread starter mjs611
- Start date
- Thread starter
- #3
The LH designation wasn't established until 1962 unfortunately. I contacted SJI and they claim no such member was ever made so I can only conclude that someone screwed up haha.
We ended up just moving the new RTU from midspan of the member to the supporting girder.
We ended up just moving the new RTU from midspan of the member to the supporting girder.
- Status
Similar threads
- Locked
- Question
- Question
