Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Missing fonts in Fcf tolerance modifiers and PMI notes

Status
Not open for further replies.
sheenangel99

sheenangel99

New member
Joined
Oct 13, 2008
Messages
15
Location
NL
Hi,
I am currently working on NX2206 and i face an issue when in drafting/PMI for "Feature Control Frame" tolerance modifiers are missing/not displayed correctly with NX fonts (eg. iso_font, blockfont..). The fonts are visible when we use windows fonts but not NX fonts. I cannot change the font from iso_font so is there any way which i can show the missing fonts.Any help would be greatly appreciated.
Also is it possible to modify .fnt files and how do we do it?

Thanks in advance
Sohela
 
 https://files.engineering.com/getfile.aspx?folder=085eaef4-0126-4035-9893-47225b603c13&file=pic1.jpg
Status
Not open for further replies.

Similar threads

rothers
  • Question Question
Truetype Fonts
Replies
5
Views
5K
GigaManf
G
SBlackBeard
  • Locked
  • Question Question
NX Journal for PMI and Location
Replies
2
Views
2K
cowski
cowski
KKKing
  • Question Question
How to Chart Dim when using PMI dim in Sheet metal
Replies
0
Views
5K
KKKing
KKKing
SDETERS
  • Locked
  • Question Question
3D PMI and MBD vs 2D Drawings
Replies
0
Views
698
SDETERS
SDETERS
Jian Wang
  • Locked
  • Article Article
Reconstruct missing areas in a point cloud face
Replies
6
Views
4K
Jian Wang
Jian Wang

Part and Inventory Search

Sponsor

Back
Top