Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mirrored Assembly

Status
Not open for further replies.

cadmate

Mechanical
Joined
May 5, 2005
Messages
84
Location
GB
Hi there, ok I created a frame generated weldment made from 40 x 40 x 5 angle, placed this in my main assembly, then mirrored it...fine.
I have now decided to change the original frame and use 40 x 40 x 3 angle, which is good, but the mirrored version does not update to represent the change, and it remains as 40 x 40 x 5 angle.
I would have thought this would update. Have I missed something??

Many thanks in advance
 
you don't miss something, the mirrored part in frame gen in not associative to the original. delete and mirror again.
 
Cheers for that cgelang
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top