Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mirror material in Autocad? 1
- Thread starter unsure
- Start date
-
1
- #2
Dear unsure,
Follow the below steps:
1. Enter the RMAT command
2. In "Materials" dialog box select the material from list
3. Click on Modify button
4. In "Modify Material" dialog box activate the "Reflection" option
5. Set the Reflection Value on a high value near to 1
6. Activate the "Mirror" check box
7. Activate the "Roughness" option
8. Set the Roughness Value on a high value
9. Click OK
10. Click OK
Farzad
Follow the below steps:
1. Enter the RMAT command
2. In "Materials" dialog box select the material from list
3. Click on Modify button
4. In "Modify Material" dialog box activate the "Reflection" option
5. Set the Reflection Value on a high value near to 1
6. Activate the "Mirror" check box
7. Activate the "Roughness" option
8. Set the Roughness Value on a high value
9. Click OK
10. Click OK
Farzad
- Status
