Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mirror Alignment on a Mazak New Turbo X48

Status
Not open for further replies.
RPosty

RPosty

Mechanical
Joined
Mar 13, 2014
Messages
164
Location
US
Friend of mine has a machine shop with one of these and asked if I could help him with it. I have worked on several different types of CO2 lasers but never a Mazak other than a simple Vacuum Leak. I only remember that Mazak was completely uncooperative in sharing any info at all. This was a complete turnoff to me. Amada, PRC, Fanuc all try to help and freely share information, but not Mazak (I would never even consider buying one for this reason).

"I am stuck on Band-Aid brand, 'cause they are stuck on me"
 
Sort by date Sort by votes
I was hoping for a mirror tuning procedure, detailing what order the mirrors get tuned. the resonator looks a lot different than your straightforward rear mirror, output coupler with folds in between.

"I am stuck on Band-Aid brand, 'cause they are stuck on me"
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
enginesrus
  • Question Question
What is the latest on high power?
Replies
0
Views
7K
enginesrus
enginesrus
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
Metalmark
  • Locked
  • Question Question
Mazak New Turbo X-48 mechanical or cut program problem?
Replies
3
Views
461
Metalmark
Metalmark

Part and Inventory Search

Sponsor

Back
Top