Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micro and Macro geometry

Status
Not open for further replies.
kodam2

kodam2

Automotive
Joined
Sep 29, 2005
Messages
8
Location
DE
Hello all,
I am not sure, is this query very basic or not, tough i am asking. What is micro and macro geometry related to gears ?. What are all the geometric parameters related to micro and macro geometries ?. Please anyone give me more details/links about this. Thanks !

regards,
kodam2
 
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
Involute Rack and Sector Pinion Gear Question
Replies
5
Views
2K
mfgenggear
mfgenggear
SAEEDGH
  • Locked
  • Question Question
difference between i and rpm
Replies
2
Views
518
PersonalProfile
PersonalProfile
rQuestionEngineering
  • Locked
  • Question Question
Leveling requirement for bevel gear driving compressors in marine and land
Replies
1
Views
1K
mfgenggear
mfgenggear
SMKRe
  • Locked
  • Question Question
Expansion of pinion and gear tooth in radial direction
Replies
6
Views
1K
3DDave
3DDave
Starker
  • Locked
  • Question Question
Inventor: Apply Gear Parameters to Existing Geometry
Replies
0
Views
270
Starker
Starker

Part and Inventory Search

Sponsor

Back
Top