Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Methanol Reformar Heater Stack emission Monitoring

Status
Not open for further replies.

MIANCH

Chemical
Joined
Aug 8, 2002
Messages
162
Location
LY
Hi All,
Our company HSE want to monitor reformar heater stack emission online,HSE told us to monitor Hg,lead, particulate matters and ozone.
Fuel gas is natural gas, my question is there any possibility to produce above said components in heater and particularly ozone and lead.
please share your experience and opinion about emission monitoring.
Best regards
 
Never heard of lead in natural gas streams. There may be minute traces of Hg. This would still be the case even if you had a reformer tube leak - no lead in the catalyst or reformer syngas product. The same may be said for the fuel gas burners at the HTS and LTS and methanol conversion reactors. Dont know about ozone. NOx monitoring and reporting would be a must with most companies.
 
George
Thanks for your input, I also know that fuel gas have not such type of impurities that can produce ozone and lead in combustion gases.
Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top