Mechanical Properties of A588 Gr. A steel 1

[sloth4z]

I am sorry if this is the wrong forum for this but I am at my wits end. Can someone here direct me to, or provide, the following mechanical properties for A588 grade A steel?

Elastic Modulus
Poisson's Ratio
Shear Modulus
Density
Tensile Strength
Yield Strength
Thermal Expansion Coefficient
Thermal conductivity
Specific Heat

all I know is tensile/ultimate strength is around 100ksi and yield is around 50ksi. I can find any information anywhere on the other properties. I have read that the properties change depending on the size and shape. I am using plate less than 1" thick. Any help on this subject would greatly be appreciated.

 

[CoryPad]

The yield strength and tensile strength are specified in ASTM A 588, available from ASTM International at:

http://www.astm.org/cgi-bin/SoftCar...org/DATABASE.CART/REDLINE_PAGES/A588A588M.htm

MatWeb has all but the last three:

http://www.matweb.com/search/SpecificMaterial.asp?bassnum=MSA588A0

And for those, you could use the values for 1020 steel:

http://www.matweb.com/search/SpecificMaterial.asp?bassnum=M1020A

Regards,

Cory

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.

 

[sloth4z]

Thank you SO much. Was this the proper forum to post this question?

 

[CoryPad]

Yes

Regards,

Cory

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.