Aug 2, 2010 #1 bravedog Mechanical Joined May 29, 2008 Messages 6 Location US Would anyone know of a good flowmeter that can measure saline flow in an IV line? The saline will be aerated. I also need it to a fast reaction time (<100ms). Thanks!
Would anyone know of a good flowmeter that can measure saline flow in an IV line? The saline will be aerated. I also need it to a fast reaction time (<100ms). Thanks!
Aug 2, 2010 #2 hacksaw Mechanical Joined Dec 7, 2002 Messages 2,587 Location US range gated doppler (20 mhz, ultrasonic) has been used in small diameter passages Upvote 0 Downvote
Aug 2, 2010 Thread starter #3 bravedog Mechanical Joined May 29, 2008 Messages 6 Location US Any ideas on where I could buy one of those? Upvote 0 Downvote
Aug 3, 2010 #4 hacksaw Mechanical Joined Dec 7, 2002 Messages 2,587 Location US the only one I am familiar with was custom built R&D and produce flow profiles in small capillaries you might try GE Medical Upvote 0 Downvote
the only one I am familiar with was custom built R&D and produce flow profiles in small capillaries you might try GE Medical
Aug 14, 2010 #5 danw2 Industrial Joined Oct 21, 2004 Messages 1,528 Location US I don't know what the saline flow rate in an IV line is, but here's a snapshot of flow rates for a low flow coriolis meter: http://www.brooksinstrument.com/flo...al-mass-flow/coriolis-controllers-meters.html Upvote 0 Downvote
I don't know what the saline flow rate in an IV line is, but here's a snapshot of flow rates for a low flow coriolis meter: http://www.brooksinstrument.com/flo...al-mass-flow/coriolis-controllers-meters.html