Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Measurement Over pins 1
- Thread starter rkarthik
- Start date
-
1
- #2
diamondjim
Mechanical
Machineries Handbook lists
1.44/dp for internal gears and
1.68/dp or 1.728/dp for external
gears.
For ball sizes, I use 1.875/dp for
the max ball size and 1.500/dp for
min ball size and round up or down
accordingly to a common ball diameter.
1.44/dp for internal gears and
1.68/dp or 1.728/dp for external
gears.
For ball sizes, I use 1.875/dp for
the max ball size and 1.500/dp for
min ball size and round up or down
accordingly to a common ball diameter.
- Status
Similar threads
- Locked
- Question
- Locked
- Question