Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meaning of T1 T2 T3 R1 R2 R3 in Oload

Status
Not open for further replies.
meolo2002

meolo2002

Marine/Ocean
Joined
Sep 24, 2009
Messages
37
Location
IT
Hi to everybody!
I woould ask you about the meaning of t1 t2 t3 r1 r2 r3...they are related to dof, but i don't understand why if i apply a vertical load (along Y, so under the line FY) it appear on the same line a component R3.
Thank you
 
Status
Not open for further replies.

Similar threads

sivasooriyan
Reg. property groups in Autodesk Nastran
Replies
1
Views
8K
IRstuff
IRstuff
sivasooriyan
  • Question Question
Reg. property groups in Autodesk Nastran
Replies
0
Views
8K
sivasooriyan
sivasooriyan
EKCP
  • Question Question
TABLES1 limited number of stress/strain entries for SOL 401 Using FEMAP 24.06
Replies
7
Views
17K
BlasMolero
BlasMolero
S
  • Locked
  • Question Question
Problem in Modal analysis
Replies
5
Views
4K
BlasMolero
BlasMolero
A
  • Question Question
can we output Topology Optimization Element Density Distribution in the op2 itself
Replies
0
Views
2K
abhishek33
A

Part and Inventory Search

Sponsor

Back
Top