Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Max. Interpass for Hardfacing

Status
Not open for further replies.
newweldeng09

newweldeng09

Mechanical
Joined
Oct 31, 2008
Messages
84
Location
US
The maximum interpass temperature for production hardfacing cannot be exceeded per QW-406.4. Is it possible that when welding a multi-layer, (also multi-pass), weld continuously that the measurement of the interpass temperature does not apply?
 
Sort by date Sort by votes
No, that is the purpose for having an interpass temperature; to control or limit the amount of heat into a weld region.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

milosd
  • Locked
  • Question Question
ASME SB-564 Maximum section thickness for N06625
Replies
1
Views
2K
EdStainless
EdStainless
bck2ftr
  • Question Question
ASME B16.9 - factor f for proof test
Replies
3
Views
11K
goutam_freelance
goutam_freelance
YuJie_PV
  • Question Question
factors to be considered for vessels in cyclic service
Replies
10
Views
8K
YuJie_PV
YuJie_PV
abangbikerz
  • Question Question
lowest permissible temp for any material
Replies
3
Views
6K
abangbikerz
abangbikerz
DekDee
  • Locked
  • Question Question
Back for another burst
Replies
7
Views
4K
DekDee
DekDee

Part and Inventory Search

Sponsor

Back
Top