Mating edge to face? Mating edge to sketch line?

[arlenn]

is this possible? how?

 

[donyoung]

Hi,

Mate Face to Sketch(line) line assumed to drawn in Assembly:
use either Mate or Planar:

- select the face of the placement part
- select the sketch line
- now you have the choice to mate to either
of two planes (which are perpenticular to
each other)

Mate Edge to Face

not direkt you have to use Connect then:

- select a point on the edge
- select target face

This works at least with V18 and up

dy

 

[ksudavid]

You can use the Parallel Assy relation to make a part edge and sketch line colinear.

David

 

[beachcomber]

The parallel relationship also works for a cylinder to line.

bc.