We have the MathCAD file accessible, but it is designed (and much faster) to input its required starting values from the MathConnex interface. How do we get this version 13 MathCAD to accept this input data ? If MathConnex does not work with these later versions, is there an Excel (or any other) front-end that would do the same ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mathcad 13 using Mathconnex
- Thread starter seesaw
- Start date
Mathconnex seems to have disappeared with Mathcad 12/13 - much to my irritation, as I had a few Mathconnex projects from earlier versions that were quite useful. But you can use Excel to "talk" with Mathcad (via an add-in, or just as a "normal" Windows thing (ODE or whatever the current terminology for these things is)).
Bung
Life is non-linear...
Bung
Life is non-linear...
- Thread starter
- #3
As a registered user, all associated add-ins, updates, etc., can be downloaded from:
TTFN
TTFN
- Status
Similar threads
- Locked
- Question
