Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

material spec for padeyes

Status
Not open for further replies.
joeypanis

joeypanis

Mechanical
Joined
Sep 1, 2003
Messages
2
Location
US
What material do you recommend for padeyes as per industry
standard?
 
Sort by date Sort by votes
Depends on you loading and allowable configuration.
 
Upvote 0 Downvote
Thank you very much for the help. I'll be using ASTM572-50 for my 10 ton padeye to be used in an offshore rig.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

FrancoisY
  • Locked
  • Question Question
What is this Material & Specification? Please help
Replies
4
Views
5K
FrancoisY
FrancoisY
S
  • Question Question
Optistrcut to Nastran material conversion
Replies
1
Views
368
SWComposites
SWComposites
A
  • Question Question
Excavator bucket pin material
Replies
14
Views
4K
TugboatEng
TugboatEng
charls1
  • Locked
  • Question Question
Material application
Replies
0
Views
3K
charls1
charls1
Sushmanth
  • Locked
ASME SA336 or SA182 code material specification related
Replies
1
Views
1K
ShataCastings
ShataCastings

Part and Inventory Search

Sponsor

Back
Top