Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material choice for H2 application

Status
Not open for further replies.

aombr

Petroleum
Joined
Sep 8, 1999
Messages
13
Location
BR
Does anyone help me about the most apropriate ASTM pipe material (A-333 Grade 11 or A-335 Grade P5) for the following design conditions/application: medium = Hydrocarbon with H2, pressure design = 40 bar and design temp. = 300 gr. C ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top