Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

material 12NC3 (CR1)

Status
Not open for further replies.
Bozso

Bozso

Automotive
Joined
Nov 3, 2005
Messages
4
Location
HU
Hi,

I have a drawing with material spec 12NC3 (CR1).
I have found any data about 12NC3 (CR1) material.
I am looking for material properties, equivalents.

Thanks
 
Sort by date Sort by votes
I have no idea about 12NC3 but CR1 is cold rolled mild steel, I believe the German equivalent is St14 and the EN 10130 equivalent is DC04, but please check that.

I would suggest contacting Corus.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

rQuestionEngineering
  • Locked
  • Question Question
silicone rubber material for CV boots
Replies
10
Views
1K
Ng2020
Ng2020
Mark Getrow
  • Locked
  • Question Question
Material selection - Cylinder sleeves
Replies
17
Views
3K
Tmoose
Tmoose
KipWiseman
  • Locked
  • Question Question
Profile tolerance application where material thickness tolerance impacts line location
Replies
1
Views
236
3DDave
3DDave
quaipau
  • Locked
  • Question Question
Material for small motorcycle header
Replies
6
Views
325
michaelwoodcoc
michaelwoodcoc
znamer
  • Locked
  • Question Question
brake fluid reservoir - material
Replies
16
Views
1K
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top