Adrian77
Marine/Ocean
- Sep 4, 2003
- 31
Hi,
I have a problem with the mass propperties shown in the part list inside the drafting.
I follow the tutorial, create the part list, where the different parts are shown, I add a columnn where the <W$=@$MASS> atribute is included. The problem is that besides in the design window, the wheight values are OK, in the part list inside the drafting, it appears multiplied by 1000, for every part.
I also create a volume columnn, and is OK in bothe design and draftng.
I wonder if it has something to do with the units settings, the density seems to be the problem.
Any advice would be helpful.
Thanks in advance,
I have a problem with the mass propperties shown in the part list inside the drafting.
I follow the tutorial, create the part list, where the different parts are shown, I add a columnn where the <W$=@$MASS> atribute is included. The problem is that besides in the design window, the wheight values are OK, in the part list inside the drafting, it appears multiplied by 1000, for every part.
I also create a volume columnn, and is OK in bothe design and draftng.
I wonder if it has something to do with the units settings, the density seems to be the problem.
Any advice would be helpful.
Thanks in advance,
