Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Masonry Design Guide
- Thread starter ltlspf
- Start date
concretemasonry
Structural
The classic is the companion to ACI 530. - It is called the Masonry Designers Guide (MDG). It is usually released slighly later the the ACI 530, since it involves the practical applications and relationship to the major model codes.
In most metro areas, there are one-day masonry seminars sponsored by ACI groups and local masonry groups. The presenters are the people that were involved in the writing and updating of ACI 530. Often, hard copies of the two documents (ACI 530 and MDG) are included or offered at a discount. A CD is also available.
If you are a member of the ACI or The Masonry Society (TMS) discounted prices are available. The MDG is not a flimsy throw-away document, but a comprehensive document including examples of the use of ACI 530 in real life.
Dick
In most metro areas, there are one-day masonry seminars sponsored by ACI groups and local masonry groups. The presenters are the people that were involved in the writing and updating of ACI 530. Often, hard copies of the two documents (ACI 530 and MDG) are included or offered at a discount. A CD is also available.
If you are a member of the ACI or The Masonry Society (TMS) discounted prices are available. The MDG is not a flimsy throw-away document, but a comprehensive document including examples of the use of ACI 530 in real life.
Dick
- Thread starter
- #3
bridgebuster
Active member
NCMA used to post a direct link to its "TEK" Manuals but now it's a bit convoluted since you now have to get the design guides from manufacturers. If you go to this page, you can pick a state and see who are the manufacturers and what technical info they provide.
Here's a link to the TEK Manuals on the Oldcastle site:
Here's a link to the TEK Manuals on the Oldcastle site:
concretemasonry
Structural
The NCMA policy is to provide information to everyone interested and a measure of the need for the technical support of the members that fund the program.
You can just pick any state and any producer to get the access. I switch around to avoid using just one since the same TEK notes are available to all.
Because the NCMA staff is active on all professional groups,(ACI, ASTM, TMS and others) and other national nnd state groups and suppliers they have a wealth of information to share. The unique lab facility, they als do contract testing for the government and other groups such as ASNI and foreign code bodies and manufacturers in addition to American manufacturers.
You can just pick any state and any producer to get the access. I switch around to avoid using just one since the same TEK notes are available to all.
Because the NCMA staff is active on all professional groups,(ACI, ASTM, TMS and others) and other national nnd state groups and suppliers they have a wealth of information to share. The unique lab facility, they als do contract testing for the government and other groups such as ASNI and foreign code bodies and manufacturers in addition to American manufacturers.
I'd like to concur with concretemasonry: the Masonry Designer's Guide is an excellent book. The current one is MDG-6, which comes with a companion CD. I got it as a door prize at one of the local masonry seminars. (Probably the best door prize I've gotten.) The seminars are also excellent.
The TEK manuals online are also very good.
Between the two, I daresay you don't need to buy a textbook.
regards,
chichuck
The TEK manuals online are also very good.
Between the two, I daresay you don't need to buy a textbook.
regards,
chichuck
- Thread starter
- #7
You can also get UFC 3-310-05A "Masonry Structural Design for Buildings" in pdf format from
concretemasonry
Structural
Itlspf -
It is a person thing. I do it because I have known most of the producers and like to uniformly support their efforts in promoting the industry and technical work with the NCMA and other organizations.
Dick
It is a person thing. I do it because I have known most of the producers and like to uniformly support their efforts in promoting the industry and technical work with the NCMA and other organizations.
Dick
- Status
Similar threads
