Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Many PSM save in Flat Pattern
- Thread starter 85258
- Start date
Hi,
I'm not aware of any quick method. i.e. without opening the PSM and selecting the up surface and XY point.
I would think it was possible with a VB add-on, but I'm not aware of any that are commercially available free or otherwise.
Although Sheet Metal is a large part of SE and IMHO is possibly the best. It does lack a few key production procedures that would help Sheet Metal end users
There is a possibility that there is a Cad/Cam programming systems that integrates with Sheet Metal and speed up the process……….
I'm not aware of any quick method. i.e. without opening the PSM and selecting the up surface and XY point.
I would think it was possible with a VB add-on, but I'm not aware of any that are commercially available free or otherwise.
Although Sheet Metal is a large part of SE and IMHO is possibly the best. It does lack a few key production procedures that would help Sheet Metal end users
There is a possibility that there is a Cad/Cam programming systems that integrates with Sheet Metal and speed up the process……….
- Thread starter
- #4
I see this application for make what i want.
Everyone know another application for making many PSM in Flat Pattern ?
Thank you.
Everyone know another application for making many PSM in Flat Pattern ?
Thank you.
- Thread starter
- #5
- Status