Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Make Sketch visible in .dft

Status
Not open for further replies.
beebo666

beebo666

Coastal
Joined
Dec 7, 2006
Messages
25
Location
US
is it possible to have a 2d sketch in a part file visible in the draft file?
 
Sort by date Sort by votes
Select properties on the draft view, right-click on solid body and select list all. Left-click on the sketch and select Show, click ok.
 
Upvote 0 Downvote
Thanks RAM, just what i was looking for.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

NirVidP
  • Locked
  • Question Question
How to 'Create Part In Place' using vba?
Replies
0
Views
981
NirVidP
NirVidP
QuentinMoran
  • Locked
  • Question Question
3rd Party dft Viewer
Replies
1
Views
1K
matnas
matnas
Vikas4auto2019
  • Locked
  • Question Question
How to add bulk components in to the assembly.
Replies
0
Views
939
Vikas4auto2019
Vikas4auto2019
NZMark
  • Locked
  • Question Question
Dimension scaling of drawing objects in Draft
Replies
3
Views
2K
kjoiner
kjoiner
John_W2
  • Locked
  • News News
Parametric patterns in drawings
Replies
0
Views
880
John_W2
John_W2

Part and Inventory Search

Sponsor

Back
Top