Dec 28, 2006 #1 beebo666 Coastal Dec 7, 2006 25 is it possible to have a 2d sketch in a part file visible in the draft file?
Dec 28, 2006 #2 RAMviking Mechanical Oct 29, 2006 40 Select properties on the draft view, right-click on solid body and select list all. Left-click on the sketch and select Show, click ok. Upvote 0 Downvote
Select properties on the draft view, right-click on solid body and select list all. Left-click on the sketch and select Show, click ok.
Dec 28, 2006 Thread starter #3 beebo666 Coastal Dec 7, 2006 25 Thanks RAM, just what i was looking for. Upvote 0 Downvote
