sitti
Automotive
- Jul 4, 2011
- 19
Hello Everybody,
I have a part, which I want to machine on a Star SV-12 machine.
The machining of pink surfaces are ok (these are machined first),
I'm having problem with the blue ones.
The plan is to machine it with a tapered milling tool, with the needed R1 lower radius,
in a driven tool.
Which method is suitable for this?
Any of you have experiences with machining with Star on NX?
A simulation would be really helpful for machining these faces. If you have a star machine simulation,
a video of this process would be great.
Thanks for any help.
I have a part, which I want to machine on a Star SV-12 machine.
The machining of pink surfaces are ok (these are machined first),
I'm having problem with the blue ones.
The plan is to machine it with a tapered milling tool, with the needed R1 lower radius,
in a driven tool.
Which method is suitable for this?
Any of you have experiences with machining with Star on NX?
A simulation would be really helpful for machining these faces. If you have a star machine simulation,
a video of this process would be great.
Thanks for any help.
