Low Temp Pump

[BREITFIELD]

I am trying to find a pump that can pump Jet A fuel that is at -55 to -60 degrees C. The pump itself will be outside the envirnmental chamber. Flow rate 500 to 3000mL/min. Jet A fuel has a Kinematic Viscosity of 13 Centistokes at -50C. Any pump manufacturer leads would be appreciated.

 

[Clvet]

I don't do a lot of low temp stuff myself but the one project I did work on had an Innomag pump(

http://www.innomag.com)

do some odd temperature cycling application that went down to -90 F. Other than the casing frosting up on the outside it was fine.

 

[ciise]

I remember doing some low temperature applications with ITT GOULDS pumps.

http://austindenholm.com/id23.htm

 

[dcasto]

ebara cryodynamics

http://www.ebaraintl.com/