Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Low pressure sour gas
- Thread starter PAN
- Start date
Regardless of the total pressure and partial pressure of H2S, the following standards suggest the guideline of material selection, test & handling to avoid SSCC, SOHIC, and hydrogen blistering.
1. Materials and fabrication practices for new pressure vessels used in wet H2S refinery service, NACE Publ.8X194, item No.24179, 1994 (USA)
2. A working guide for carbon steel equipment in wet H2S service (developed largely from oil refinery experience), EEMUA, Publ. No. 179, 1997 (EUROPE)
3. Most of the oil & gas production and refinery company specifications for sour service
Thomas Eun/ NACE Corrosion Specialist
thomase@natco.ab.ca
thomaseun@hanmail.net
1. Materials and fabrication practices for new pressure vessels used in wet H2S refinery service, NACE Publ.8X194, item No.24179, 1994 (USA)
2. A working guide for carbon steel equipment in wet H2S service (developed largely from oil refinery experience), EEMUA, Publ. No. 179, 1997 (EUROPE)
3. Most of the oil & gas production and refinery company specifications for sour service
Thomas Eun/ NACE Corrosion Specialist
thomase@natco.ab.ca
thomaseun@hanmail.net
- Status
Similar threads
- Locked
- Question