Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Low Flow Channel in Dry Detention Pond

Status
Not open for further replies.
ftroop82

ftroop82

Civil/Environmental
Joined
May 9, 2005
Messages
19
Location
US
Local agency wants the calculations for a Low Flow rip-rap channel in my Dry Detention Pond. How to you incorporate\model this in the pond calcs.
 
Sort by date Sort by votes
You could use a reach to model the channel. It wouldn't be part of the detention pond, but it would let you evaluate channel flow for smaller storms.


Peter Smart
HydroCAD Software
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
HydroCAD-Pond Routing in Series
Replies
3
Views
2K
psmart
psmart
T
  • Locked
  • Question Question
Wet Pond Modeling
Replies
7
Views
3K
TBENGINEERING
T
swazimatt
  • Locked
  • Question Question
HEC-HMS Add Base Flow to Wetland pond
Replies
1
Views
790
psmart
psmart
PaEngr
  • Locked
  • Question Question
Flow splitter modeling
Replies
1
Views
1K
psmart
psmart
JDeWick
  • Locked
  • Question Question
pipe detention system kickback
Replies
4
Views
838
JDeWick
JDeWick

Part and Inventory Search

Sponsor

Back
Top