Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looking for a RJ45 to RJ11 Coupler
- Thread starter tessifay
- Start date
RJ45 is 8P8C (often used for Ethernet), and RJ11 is 6P2P (often used for POTS). What's the application? If you're using Cat 5/6 wiring for POTS, most installers would simply reterminate. If you must have an adapter, you may have to make an adapter cable (with dual female couplers as required).
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
