looking for 25x47x14 wheel bearings?

[bandittuner]

I'm doing a fork conversion on a motorcycle and need an unusual wheel bearing size, 25x47x14.
Is there anyone who can help?

 

[diamondjim]

http://www.oldbikebarn.com/part.php...heel Bearings - Front&bike=&DisplayPerPage=20

This is 25 47 12 can you put a spacer
in to make up the difference?

 

[bearingmen]

Hi,

Check with

http://www.bocabearings.com

Thanks,

 

[diskullman]

6005 bearing is 25x47x12, use a spacer for width


Russell Giuliano
Unique Technologies Associates - Cobra Solid Lubricant

http://www.uniquetechnologies.com

 

[diamondjim]

You have not given up yet.
You can have it custom made
at one heck of a price.
If you cannot use one or
two spacers and use the
standard 25x47x12 bearing
you are going to spend a lot
of money. I think there is
also a 20x47x14 available.

 

[diskullman]

You can also get a 6204 bearing (47mm OD x 14mm width) with either 5/8" bore or a 3/4" bore. These are slightly special, but readily available
Part# 6204-2RS-12 for ¾"
6204-2RS-10 for 5/8"

Russell Giuliano
Unique Technologies Associates - Cobra Solid Lubricant

http://www.uniquetechnologies.com

 

[unclesyd]

Being a wheel bearing is this a tapered roller bearing?