Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Longitudinal compressive stress as seen in pvlite
- Thread starter rris9
- Start date
jehan17718
Mechanical
The maximum allowable longitudinal compressive stress is the B value as outlined in ASME UG-23.
In combined loading conditions, the maximum allowable longitudinal compressive stress is considered to be 1.2B as oulined in ASME UG-23.
PV ELite would also be using the same considering the dimensions in corroded conditions when determing the ratios which in turn determine B.
-jehan
In combined loading conditions, the maximum allowable longitudinal compressive stress is considered to be 1.2B as oulined in ASME UG-23.
PV ELite would also be using the same considering the dimensions in corroded conditions when determing the ratios which in turn determine B.
-jehan
- Status
Similar threads
- Question
- Question