Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Long Span vs Short Span Bridges

Status
Not open for further replies.

KristaGill

Civil/Environmental
May 2, 2001
1
CA
Hey just wondering if anyone knows off hand what the difference is in length of a long, short and medium span bridge.
 
Replies continue below

Recommended for you

I'm not sure if this is in writing anywhere, but based on my experience here is my definition:

Short Spans: 20-600 feet

Please keep in mind that the Federal Government defines a bridge as any structure with a clear span of 20 or more feet. Thus the lower limit. The upper limit is clearly an example of multiple short spans constructed continuously over that length.

Medium Spans: 500 to 1100 feet

There will always be some kind of overlap as the larger structures tend to be less economical over the smaller distance. For example at the 500 feet distance, a tied arch bridge would be less economical than a continuous plate girder bridge.

Long Spans: 1100-3000+ feet

In this category lie all the beautiful suspension bridges of the world. The lower end of this category is dominated in recent times by the cable-stay bridge.

I hope you find this information helpful.
 
Prefabricated Pedestrian Bridges

short <70-80'
medium 80 to 240'
long >240'

Hope this answers your question,
Rich
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top