Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Logo in Frame

Status
Not open for further replies.

Rheinhardt

Industrial
Joined
Oct 13, 2004
Messages
64
Location
AU
Hi Friends,

I have a pronblem putting a logo on our drawing frames. When i put the logo and email it only shows the path from where i loaded the logo. How do i embed the logo so when i mail it the person receiving it can see the logo,

Many thanks in advance

--Off all the things i've lost , i miss my mind the most--
 
Rheinhardt,

I would trace the logo with Acad -> and convert it to a block.

OLE objects are possible, but not easy to handle.
If you have to use this image, use the command "_etransmit". But the customer have to put this image file into the right path/folder. Remember, there are a lot of stupid customers in the world...

Lothar

ADT 2004
 
Fond the solution,Open image in word and then copy from Word to AutoCAD.

Thanks for your help

R

--Off all the things i've lost , i miss my mind the most--
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top