Is locked rotor amps proportional to FLA or any other motor attribute that would allow a quick estimate of this value? As far as I know, this is a value supplied by the manufacturer or performed as a start-up check for large motors. Any help would be greatly appreciated!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Locked Rotor Amps 3
- Thread starter eng1561
- Start date
-
1
- #2
- Thread starter
- #3
-
2
- #4
Hello eng1561,
Locked Rotor Current (LRC) and Locked Rotor Torque (LRT) are values that are influenced by the rotor design of the motor. The shape, position and material used to manufacturer the rotor bars are the key influencing factors.
Both LRC and LRT are expressed as a percentage of FLC (Full Load Current) and FLT (Full Load Torque.
Typical characteristics are as follows;
Nema Design A motors will have an LRC in the region of 800% FLC and a LRT in the region of 120% FLT.
Nema Design B motors will have an LRC in the region of 650% FLC and a LRT in the region of 180% FLT.
I hope the above helps.
Regards,
GGOSS
Locked Rotor Current (LRC) and Locked Rotor Torque (LRT) are values that are influenced by the rotor design of the motor. The shape, position and material used to manufacturer the rotor bars are the key influencing factors.
Both LRC and LRT are expressed as a percentage of FLC (Full Load Current) and FLT (Full Load Torque.
Typical characteristics are as follows;
Nema Design A motors will have an LRC in the region of 800% FLC and a LRT in the region of 120% FLT.
Nema Design B motors will have an LRC in the region of 650% FLC and a LRT in the region of 180% FLT.
I hope the above helps.
Regards,
GGOSS
- Status
Similar threads
- Locked
- Question