Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Locating an out of house metrology lab 1

Status
Not open for further replies.

Umhoefer

Automotive
Joined
Aug 13, 2001
Messages
19
Location
US
I work in the chicago land area (U.S.A.), and am searching for a out of house metrology lab to do dimensional layouts on plastic parts. These parts are mainly for the automotive industry, so Q.S. 9000/ ISO 9002 is a must. Any help or adivce would be welcome.
 
Contact Northern Illinois Unversity

Department of Industrial Engineering
Engineering Building 230
Northern Illinois University
DeKalb, IL 60115-2854
Tel: (815) 753-1282, Fax: (815) 753-0823

They may be avble to do this inhouse for a small fee or recommend someone local to you.

As a former Assistant Professor I was allways looking for realworld projects for my students.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top