Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Local loads on shell

Status
Not open for further replies.
nottoobright1

nottoobright1

Mechanical
Joined
Mar 4, 2009
Messages
1
Location
GB
Hi,

Can someone advise me as to good book or lecture notes on understanding 'Local loads on Shell'.

Henry. H. Bednar was the one I found quiet interesting but do not if there is any other I can refer into.

Thanks for advice.

 
Sort by date Sort by votes
'Pressure Vessel Design Manual' by Dennis Moss
gr2vessels
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

engineer121394
  • Question Question
Understand local vs gross structural discontinuities
Replies
1
Views
7K
TGS4
TGS4
RiyadhBPV
  • Question Question
Effect of external corrosion allowance on UG-40 normal to shell limit calculation
Replies
5
Views
2K
SnTMan
SnTMan
MSL68
  • Question Question
ASME Local Membrane Stress Distance
Replies
6
Views
5K
TGS4
TGS4
BasakAbhishek
  • Question Question
Shell forming method with low out of roundness for thin shell
Replies
17
Views
21K
r6155
r6155
DeathRay009
  • Locked
  • Question Question
Foundation loads of Vertical Vessel/HEx Lugs on Supporting Structure
Replies
16
Views
8K
Snickster
Snickster

Part and Inventory Search

Sponsor

Back
Top