Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Local Coordinates in Lusas Modeller

Status
Not open for further replies.
tisti

tisti

Mechanical
Joined
Jul 6, 2014
Messages
1
Location
IT
Hi! Can anyone tell me how to assign a local coordinate sistem in Lusas? Because every time I try to assign it, it also change the directions of supports and loads that I assigned about X and Y global axes! Thank you very much!
 
Status
Not open for further replies.

Similar threads

netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
netsonicyxf
  • Locked
  • Question Question
Volume meshing in Lusas
Replies
0
Views
248
netsonicyxf
netsonicyxf
AdRo777
  • Locked
  • Question Question
Modelling Isolators on Lusas
Replies
1
Views
285
bkal
bkal
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
D
  • Locked
Meshing in Femap
Replies
3
Views
2K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top