Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Loads in a motion simulation applied to a FEM simulation

Status
Not open for further replies.
AlejandroVieyra

AlejandroVieyra

Mechanical
Joined
Apr 27, 2015
Messages
1
Location
MX


Good day.
hopefully someone can help me with the following question, when exporting loads a simulation of movement to a fem analysis, these charges are applied directly to the mesh, or where they are actually applied?

Thank you all.
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
Converting a PDF document to CGM file in NX.......................
Replies
2
Views
2K
CAD2015
CAD2015
turbineer
  • Locked
  • Question Question
SOLVED, NX2206: where's a simple FEA simulation ?
Replies
7
Views
1K
3DDave
3DDave
NXsupport
  • Locked
  • Question Question
Is there a quick way to dynamically move a datum place across a body to measure minimum wall thickness
Replies
3
Views
5K
Toost
Toost
BCE75
  • Locked
  • Question Question
Does NX have a way to display layout guides in addition to the grid on a drawing sheet?
Replies
2
Views
1K
BCE75
BCE75
Kenja824
  • Question Question
NX2027 - Is there a fix or is this a Glitch
Replies
4
Views
5K
Rob_N
Rob_N

Part and Inventory Search

Sponsor

Back
Top