Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Load introduction:composite columns

Status
Not open for further replies.
cecil123

cecil123

Structural
Joined
Jan 26, 2007
Messages
51
Location
IN
I need to design shear connectors in regions of load introduction for composite columns.I am referring Eurocode4 for the purpose.Am looking for some solved examples for the purpose to make sure am applying the codal provisions correctly.Can anyone help me with this??Please , very very urgent!!
 
Sort by date Sort by votes
Get one of the Designer's Handbooks written by Johnson and Anderson - like "Designer's Handbook to Eurocode 4, Part 1.1: Design of Composite Steel and Concrete Structures,"
 
Upvote 0 Downvote
Yes, i do have the above handbook , but for shear connectors in areas of load introduction, no examples are given
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JStructsteel
  • Locked
  • Question Question
Adjustable columns
Replies
9
Views
3K
JStructsteel
JStructsteel
Struct123ure
  • Question Question
Wood Columns Acting as "Diagonal Bracing"
Replies
1
Views
5K
JAE
JAE
eatapeach
  • Question Question
Is clearance needed at the 2nd-floor columns
Replies
5
Views
10K
phamENG
phamENG
dik
  • Question Question
Wind Load
Replies
14
Views
17K
dik
dik
L_Bey
  • Question Question
Ponding Load
Replies
15
Views
11K
DaveAtkins
DaveAtkins

Part and Inventory Search

Sponsor

Back
Top