vrdluchmun
Electrical
I am using MATLAB to do a load flow of 8 bus but MATLAB does not recognize this formula- V(i) = pol2rect(abs(Vprev(i)), angle(V(i)))
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Load flow analysis
- Thread starter vrdluchmun
- Start date
- Status
MATLAB has no built-in conversion functions between rectangular and polar coordinates. You have to write your own pol2rect function.
xnuke
"Live and act within the limit of your knowledge and keep expanding it to the limit of your life." Ayn Rand, Atlas Shrugged.
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
xnuke
"Live and act within the limit of your knowledge and keep expanding it to the limit of your life." Ayn Rand, Atlas Shrugged.
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
electricpete
Electrical
take a look at these to see if they do what you want:
cart2pol
pol2cart
=====================================
(2B)+(2B)' ?
cart2pol
pol2cart
=====================================
(2B)+(2B)' ?
HamburgerHelper
Electrical
I would recommend just using Octave.
- Status
Similar threads
- Question