Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Load-Deflection response of the Simply Supported Deep Beam for UDL

Status
Not open for further replies.
Gray.host

Gray.host

Structural
Joined
Nov 19, 2023
Messages
3
Location
AE
Does anyone have a worked example of a simply support deep beam verifying the stress and deflection analytically. I am trying to use Timoshenko beam theory however, I am unable to understand how to solve the equations.
 
Status
Not open for further replies.

Similar threads

ANE91
  • Solved
The beam is too deep Mr. Engineer
2
Replies
38
Views
9K
Aesur
Aesur
Refaat Faraj
  • Question Question
Increasing the deep beam capacity by adding a new concrete part on top of it.
Replies
7
Views
4K
Refaat Faraj
Refaat Faraj
ITsSB
  • Locked
  • Question Question
Simply supported two way slab definition
Replies
2
Views
849
Tomfh
Tomfh
Eng16080
  • Locked
  • Question Question
Deflection of Simply Supported, Uniformly Loaded Beam, with Rotated Section
2
Replies
28
Views
2K
Eng16080
Eng16080
Kishore sk
  • Locked
  • Question Question
USING 50% UDL load For Connection Design
2
Replies
24
Views
2K
TLHS
TLHS

Part and Inventory Search

Sponsor

Back
Top