Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Level gauges mounted on a bridle.

Status
Not open for further replies.

Indy

Industrial
Dec 14, 2012
172
GB
I have a question about magnetic level gauges mounted on a bridle. For example if there is a centre to centre distance of 6000mm between the nozzles on the vessel and we want to divide this range( 6000mm/3) between three level gauges then is there a standard distance that the gauges must overlap by?

Thanks
 
Replies continue below

Recommended for you

I don't think there is a requirement of overlapping between gauges.
Have the vendor to propose three equal length gauges with a minimum overlap to cover the 6000mm bridle.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor